top of page
14/NOV/2023
CHRISTMAS POSTING
The last posting dates calculator
06/APR/2023
HOLIDAY
The shop will be closed from 14th to 28th April!
Manuals and other sections will be available.
Thank you for your understanding!
04/APR/2023
NEW MODULE
XPRESSNET KEYBOARD
- the module is suitable to control 1024 accessories
- available in the Shop
26/JAN/2023
COMING SOON
XPRESSNET KEYBOARD
- accessory control with 4x4 keyboard
- RJ12 XpressNet terminal
- the addresses between 1-1024
- XpressNet address between 1-31
- Roco/Lenz mode
- 4 memory buttons to save 4 addresses
- ON/OFF function to control the Central Station
- 128x64 LCD screen
03/JAN/2023
LOYALTY PROGRAM
From the beginning of the New Year, you can earn points with every purchase.
Visit us, sign in, collect points, and use them for a discount!
14/DEC/2022
CHRISTMAS
I wish all visitors and customers a Merry Christmas and a Happy New Year!
10/DEC/2022
NEW VERSION
SERVO CONTROLLER - SWITCH VERSION
- new firmware allows controlling 4 servos with tactile switch
- ON position: max degree, OFF position: min degree
- all functions are the same as the old version
03/NOV/2022
CHRISTMAS POSTING
Last posting dates for Christmas
07/OCT/2022
HOLIDAY
The shop will be closed from 17th October to 31st October!
Manuals and other sections will be available.
Thank you for your understanding!
24/AUG/2022
COMING SOON
CAR PARKING MODULE
- fully automatic control of a parking house
- the module controls a barrier and shows the remaining parking places
- servo output (for a barrier)
- with 2 infra sensors (counts incoming cars and outcoming cars)
- 128x32 LCD screen
06/APR/2022
NEW VERSION
DCC POINT MOTOR DECODER
- output for 4 point motors
- suitable to all motorized points (Stall point, Kato, etc)
- the module reverses the polarity of outputs
- adjustable output impulse between 10 ms to 2,5 sec
- consecutive addresses (1-4, 5-8, etc.)
- 1 A continuous current per output
08/MAR/2022
POSTING UPDATE
Due to the conflict in Ukraine, the An Post suspended mail services in Ukraine, Russia, and Moldova.
More info:
https://www.anpost.com/Media-Centre/News/Suspension-of-all-mail-services-in-Ukraine
31/DEC/2021
I WISH YOU ALL THE BEST IN 2022!
10/DEC/2021
CHRISTMAS
I wish all my friends and customers a Merry Christmas!
22/NOV/2021
CHRISTMAS POSTING
Last posting dates for Christmas
28/OCT/2021
NEW MODULE
REVERSE MODULE
- fully automatic control of the loop section
- for all gauges
- for digital systems only
- with 4 sensors
- output current: 8A
- works from both directions
09/SEP/2021
COMING SOON
FIRE/WELDING SIMULATOR
- the module controls 3 outputs
- fire or welding light effect
- power supply: 6-20V DC
- output current: 400 mA / channel
- size: 30 x 23 mm (1,26" x 0,80")
08/APR/2021
NEW MODULE
PLATFORM MODULE
- new module available in Shop
- the module displays a train destination, stations, and real-time
- 6 different departure times
- type and name of the train
- the name of the final destination
- scrolling route with the name of cities
- platform number
- time (hh:mm:ss)
08/APR/2021
AVAILABLE
DCC SIGNAL LIGHT DECODER - KIT
- available your favorite module in a KIT version
03/DEC/2020
CHRISTMAS POSTING
Last posting dates for Christmas
(more info: An Post)
Ireland: 21st December
N.Ireland / UK: 18th December
Europe: 12th December
USA / Canada: 7th December
Rest of the World: 7th December
03/OCT/2020
NEW MODULE
FLASHER
- new module available in Shop
- suitable for a grade crossing
- module controls two alternately flashing LEDs
- adjustable speed
27/SEP/2020
UPDATE
From September 29th the An Post (Irish Post) is able to send a parcel to more than 60 countries worldwide.
Please check your destination before ordering:
https://www.anpost.com/Help-Support/Covid-19
31/AUG/2020
BLACK FRIDAY MONTH
- price reduced for all modules
- only in September
23/JUL/2020
AVAILABLE
RF DC MOTOR CONTROLLER
- new version!
- joystick control
- OLED screen
- easier address selection
- servo output
19/JUL/2020
NEW MODULE
FADE LIGHT
- suitable for digital LED strip only
- module fades from white color to blue to simulate day and night
- adjustable fade speed (5-100 seconds)
- adjustable delay between day and night from 1 to 10 minutes
- relay output to connect for example street lights
- 5V power supply needed
21/JUN/2020
NEW MODULE
RANDOM LIGHTS
- new module available in Shop
- this module controls 10 outputs randomly
- 100 mA current / output
- suitable for house lights to simulate nightlife
- adjustable speed
21/JUN/2020
AVAILABLE
DCC LED DECODER
- the module is available again
20/JUN/2020
UPDATE
The An Post can currently send mail to 33 countries worldwide.
Please check your destination before ordering:
https://www.anpost.com/Covid-19/Mails-Parcels-services
COMING SOON
RF DC MOTOR CONTROLLER
- new version coming soon!
- joystick control
- OLED screen
- easier address selection
- servo output
31/MAR/2020
ATTENTION
Please read the list of destinations where the An Post can currently send mail:
https://www.anpost.com/Covid-19/Mails-Parcels-services
21/MAR/2020
UPDATE
The SHOP is open again!
Modules are available in limited quantities yet.
If you need more modules please contact me.
15/MAR/2020
SHOP
The SHOP will be open again soon!
23/FEB/2020
SHOP CLOSED
The SHOP will be closed for a few weeks during our move.
I apologize to everyone in advance. Thank you!
08/JAN/2020
AVAILABLE
SHUTTLE TRAIN
- new version available
- middle station input
- 3 outputs for signal lights
30/DEC/2019
I WISH YOU ALL THE BEST IN 2020!
16/DEC/2019
CHRISTMAS
I wish all my friends and customers a Merry Christmas!
08/DEC/2019
RENOVATION
During house renovation modules will be available in limited quantity. I will try to keep updated all the products in the Shop.
I apologize to everyone in advance. Thank you!
13/NOV/2019
CHRISTMAS POSTING
Last posting dates for Christmas
(more info: An Post)
Ireland: 20th December
N.Ireland / UK: 19th December
Europe: 16th December
USA / Canada: 6th December
Rest of the World: 6th December
20/OCT/2019
NEW MODULE
DCC FUNCTION DECODER
- new version is available in Shop
- new dimension (only: 22 x 15 mm (0.87" x 0,59")
19/SEP/2019
COMING SOON
REVERSE MODULE
- fully automatic control of loop section
- for a DC system only
- speed control with rotary encoder
- Stop/Direction with rotary encoders push button
- direction change protection: direction change is allowed in case only if the train has been stopped
- module reverses the polarity only in the loop rails!
- input for two sensors (entering and leaving)
18/JUL/2019
COMING SOON
FADE MODULE
- suitable for digital LED strip only
- module fades from white color to blue and backward to simulate day and night
- adjustable fade speed (5-100 seconds)
- adjustable delay between day and night from 1 to 60 minutes
- relay output to connect for example street lights
- 5V power supply needed
16/JUL/2019
AVAILABLE
DCC SIGNAL LIGHT DECODER
- the new version is suitable for all lights with common cathode
27/JUN/2019
NEW LANGUAGE
HUNGARIAN LANGUAGE
The site is also partially available in Hungarian!
17/MAY/2019
HOLIDAY
The shop will be closed until 3rd June!
Manuals and other sections will be available.
Thank you for your understanding!
09/MAY/2019
COMING SOON
AUTO SIGNAL MODULE
- the module is suitable for DC and DCC system too
- automated control of 3 aspects signal light
- input for sensor
- relay output
- when the train covers the sensor the signal goes to red. Keeps red until the sensor stay uncovered for at least 1.5 seconds, then the signal goes to yellow (half speed) and after 5 seconds goes to green (full speed)
21/APR/2019
COMING SOON
DCC SIGNAL LIGHT DECODER
- new version available soon
- the new version is suitable for all lights with common cathode
11/APR/2019
AVAILABLE
DIY KIT SET
- four modules are available:
- DCC Reverse module
- Feedback module - S88N
- DCC Servo decoder
- DCC Turnout decoder
28/MAR/2019
COMING SOON
SHUTTLE TRAIN
- new version available soon
- middle station input
14/MAR/2019
NEW LANGUAGE
SLOVAK LANGUAGE
The site will be available in several languages soon!
07/MAR/2019
COMING SOON
DIY KIT SET
You can build the decoders and modules by yourself
The Set includes:
- all components
- printed circuit board
- schematic and how to use manual
28/FEB/2019
COMING SOON
ROCONET HUB
- new version
- five RJ12 (6p6c) terminal outputs
- suitable for RocoNet, XpressNet and more
- LED control of power supply
1/FEB/2019
COMING SOON
GRADE CROSSING MODULE
- new version
- adjustable range of servos
31/DEC/2018
NEW MODULE
DCC ONE SERVO DECODER
- available in Shop
- price: 10€
6/DEC/2018
COMING SOON
DCC ARDUINO INTERFACE
- the module is suitable to connect Arduino to the DCC system
- LED indication
- power supply: 5V
- output to Arduino digital I/O pin
07/NOV/2018
CHRISTMAS POSTING
Last posting dates for Christmas
(more info: An Post)
Ireland: 20th December
N.Ireland / UK: 19th December
Europe: 18th December
USA / Canada: 7th December
Rest of the World: 7th December
27/SEP/2018
AVAILABLE
Another DIY module has been added!
01/SEP/2018
RE-OPEN SHOP
The Shop is now open again!
Everyone is welcome!
29/JUL/2018
HOLIDAY
The shop will be closed from 31st July to 20th August!
Manuals and other sections will be available.
Thank you for your understanding!
29/JUL/2018
COMING SOON
BLUETOOTH SERVO CONTROLLER
- the module is suitable to control 4 micro servos
- rotation servos between 0-180 degrees
- servo buzzing protection
- 4 universal outputs (100 mA/channel)
- including Android application
25/JUN/2018
COMING SOON
CONTINUOUS SERVO CONTROLLER
- the module is suitable to control 360 degrees rotation servo
- PWM (Pulse-width modulation) output
- adjustable speed/rotation direction with a potentiometer
- pushbutton to ON/OFF servo
07/APR/2018
NEW MODULE
DC MOTOR CONTROLLER
- available in Shop
- price: 30€
16/MAR/2018
COMING SOON
DC MOTOR CONTROLLER
- the module is suitable to command single brushed DC motor
- control your analog locomotive with PWM (Pulse-width modulation)
- adjustable speed with a potentiometer
- pushbutton to change direction
- input voltage: 8-15V AC/DC
- maximum output current: 2A
- green backlight LCD (direction and speed in %)
03/MAR/2018
NEW MODULE
POINT MOTOR ADAPTOR
- available in Shop
- can be used with DCC Turnout decoder to control motorized point
- price: 12€
17/FEB/2018
NEW MODULE
DCC POINT MOTOR DECODER
- available in Shop
- Master version: 21,90€
16/FEB/2018
COMING SOON
RF THROTTLE
- the module is suitable to command a DC motor (analog locomotive) with Radiofrequency remote for a long distance
- suitable for garden layout
- range about 1 mile/1,6 km
Transmitter:
- the loco speed with rotary encoder
- direction/Stop with rotary encoder's push-button
- loco address selection with push button
- 2 pushbuttons control 4 universal outputs (lights, smoke generator, horn, coupler)
- direction change protection
- 6 locomotives simultaneously with one Transmitter
- 7 segments display - shows locomotive address
Receiver:
- 1,7 A output
- up to 20 volts power supply
- the address between 1 - 10
- 4 universal outputs
- the 4th output is active if loco moves on (smoke generator, warning flasher, sound)
- size: 40 x 20 mm (1,6” x 0,8”).
15/FEB/2018
COMING SOON
DCC POINT MOTOR DECODER
- suitable for DCC system
- output for 4 point motors
- suitable to all motorized points (Stall point, Kato, etc)
- output impulse between 1 ms to 2,5 sec
- 1 A continuous current per output
10/FEB/2018
NEW MODULE
SIGNAL LIGHT MODULE
- suitable for DC (analog) system
- output for 2-, 3- or 4-aspect signal lights (semaphore)
- the mode is selectable by a jumper
- terminal to 4 push buttons
25/DEC/2017
MARKET
The second-hand marketplace is now open to selling your used locos, wagons or layout accessories.
You can advertise for free!
Everyone is welcome!
01/DEC/2017
AVAILABLE
SHUTTLE TRAIN MODULE
- suitable for a DC system
- the module commands train between 2 stations
- adjustable: speed, acceleration, deceleration, station delay
- the counter starts after the train arrived on the station
- station delay between 1-10 minutes
- optical status indication (onboard LEDs)
- including station infrared sensors
29/SEP/2017
AVAILABLE
SERVO CONTROLLER
- the module commands 4 servos with 4 pushbuttons
- LED indication of servo position
- you will always know in which position the servo arm is
bottom of page