DCC INTERFACE MODULE
 
If you would like to command your layout via PC, you will need this module!
 
The device has a USB socket to connect PC with USB cable (printer cable), XpressNet socket to connect your Command station with XpessNet cable and s88N terminal to connect Feedback module with an ethernet cable.
 
You can use 16 s88N modules with 8 inputs, so together 128 controlled sections. Address of the first module is 65. You don’t need an external power supply, the module is powered from Command station (needs to be connected)
 
Short video how it’s work with JMRI: Here
 
The module needs to install a driver in your system: Download